英语翻译About Pallet List Icons During operations the Pallet List icons change according to conditions.These conditions are as follows:Comment The blue clock indicates a pallet is pending ready for execution.The black check indicates pallet compl

英语翻译About Pallet List Icons During operations the Pallet List icons change according to conditions.These conditions are as follows:Comment The blue clock indicates a pallet is pending ready for execution.The black check indicates pallet compl
英语翻译
About Pallet List Icons
During operations the Pallet List icons change according to conditions.
These conditions are as follows:
Comment
The blue clock indicates a pallet is pending ready for execution.
The black check indicates pallet completion.
#111
@1
1st
The red symbol identifies an aborted pallet.One or more setups did not successfully com-
plete.
The green arrow identifies the pallet has started cycle.
The yellow box indicates a pallet is suspended.The feed hold button was pressed during
cycle execution.
The green arrow in the red circle indicates an error during program execution (but another
setup is running).
A black check in the red circle indicates pallet completion but an error has occurred.
#111
@1
1st
This icon indicates an unscheduled pallet.The pallet will not be moved into machining
position in automatic operation.
Indicates data is defined but the pallet has not arrived,or is not physically present.
About Pallet List Data
In the View Pallets screen there should only be a maximum of two pallets
defined in the Pallet List.Any additional (unwanted) pallets present in the
Pallet List must be removed.Refer to "Deleting Pallets".
Page 2--116
Cincinnati Machine 91204265--001
Menu
Function Button
About Pallet Buttons
When Pallet Setup view is activated,the following buttons appear.
Description
Used to select another View Level (Setup or Fixture View).
Used to define a new pallet.
Used to locate pallet positions,select a pallet to run,and reorder the pallets.
Used to modify or add a pallet.
Remove selected pallet information.
Activates a pallet for cycle execution.
Used to define machining order,and manage pallet status.
Loads the selected pallet (on the pallet changer) onto the machine.If there is an active
pallet on the machine,pressing this button will first unload the pallet from the ma-
chine to its load station on the pallet changer,prior to loading the selected pallet.The
Load Pallet function is enabled by pressing the PALLET READY button on the pallet
changer control panel.
Unloads the active pallet from the machine to its load station on the pallet changer.
The Unload Pallet function is enabled by pressing the PALLET READY button on the
pallet changer control panel.
Notes for Pallet Load / Unload.
1.
2.
3.
The Load This Pallet / Unload This Pallet button is displayed when the
control is in a 'Not in--cycle' state.If automatic cycle has been
interupted,it will be necessary to press the Data Reset button to clear
dormant but active commands.
The Pallet Load / Unload function is duplicated on the operators
Pendant Control.See Chapter 3,SETUP Menu.
Jogging the pallet is a function of the pallet changer control unit.See
manufacturers Instruction Manual.
Cincinnati Machine 91204265--001
Page 2--117

英语翻译About Pallet List Icons During operations the Pallet List icons change according to conditions.These conditions are as follows:Comment The blue clock indicates a pallet is pending ready for execution.The black check indicates pallet compl
简直不是人翻译的啊,
数控机床 这是个专业方面的,如果不懂该专业就等于瞎翻译!
还是去找专业人士吧!
有点晕,闪了!

关于板台名单像 在操作期间板台名单像改变根据情况。 这些情况是如下: 评论 蓝色时钟表明板台是即将发生的为施行准备。 黑检查表明板台完成。 #111 @1 第1 红色标志辨认一个被放弃的板台。一个或更多设定成功地没有com- plete 。 绿色箭头辨认板台开始了周期。 黄色箱子表明板台暂停。饲料举行按钮被按了在期间 周期施行。 绿色箭头在红色圈子表明一个错误在程序执行(仅另期间 设定运行) 。 ...

全部展开

关于板台名单像 在操作期间板台名单像改变根据情况。 这些情况是如下: 评论 蓝色时钟表明板台是即将发生的为施行准备。 黑检查表明板台完成。 #111 @1 第1 红色标志辨认一个被放弃的板台。一个或更多设定成功地没有com- plete 。 绿色箭头辨认板台开始了周期。 黄色箱子表明板台暂停。饲料举行按钮被按了在期间 周期施行。 绿色箭头在红色圈子表明一个错误在程序执行(仅另期间 设定运行) 。 黑报到红色圈子表明板台完成但错误发生过。 #111 @1 第1 这个像表明一个不定期的板台。板台不会搬入用机器制造 位置在自动地工作。 表明数据被定义但板台未到达, 或不是完全存在。 关于板台名单数据 在看法板台屏幕那里应该只是二个板台最大值 定义在板台名单。任何另外的(不需要的) 板台提出在 板台名单必须被去除。参见"Deleting 的Pallets" 。 页2 -- 116 辛辛那提机器91204265 -- 001 菜单 作用按钮 关于板台按钮 当板台设定看法被激活, 以下按钮出现。 描述 过去经常选择其它看法水平(设定或装置看法) 。 过去经常定义一个新板台。 过去经常找出板台位置, 选择板台跑, 和重新安排板台。 过去经常修改或增加板台。 取消选择的板台信息。 激活一个板台为周期施行。 过去经常定义用机器制造的命令, 和处理板台状态。 装载选择的板台(在板台更换者) 机器。如果有活跃 板台在机器, 按这个按钮首先将卸载板台从ma- 脊椎对它的装载驻地在板台更换者, 在装载选择的板台前。 装载板台作用由按使能板台准备好按钮在板台 更换者控制板。 卸载活跃板台从机器对它的装载驻地在板台更换者。 卸载板台作用由按使能板台准备好按钮在 板台更换者控制板。 笔记为板台装载/卸载。 1. 2. 3. 装载这个板台/卸载这个板台按钮被显示当 控制是在'Not -- cycle' 状态。如果自动周期是 interupted, 它将是必要按数据复位按钮对明白 休眠但活跃命令。 板台装载/卸载作用被复制在操作员 下垂控制。参见章节3, 设定菜单。 跑步板台是板台更换者控制单元的作用。看见 制造商说明书。 辛辛那提机器91204265 -- 001 页2 -- 117
大哥采纳我的吧辛辛苦苦翻译的！！！！谢谢啊！！

收起